BLITZ "Miracle Stroke Adjuster" Rear Drop Knuckle

To suit TOYOTA GT86, GR86 (ZN6/ZN8) & SUBARU BRZ (ZC6/ZD8)

Product Specifications:

• This optional part, installed simultaneously with the DAMPER ZZ-R, optimizes the position of the rear lower arm (lateral link).
• Normally, lowering the vehicle's ride height alters the position of the roll center, but this device corrects it to the correct position even while lowering the vehicle.
• Optimizing the rear suspension improves road-holding ability. This also creates a greater sense of rigidity throughout the vehicle, leading to better front-end handling.
• The eccentric cam mechanism at the knuckle connection allows for a wide range of camber angle adjustment at the rear, achieving the same camber adjustment as the front.

Features for the 86/BRZ Platform:

• By installing a dedicated adjuster with a stepless eccentric cam mechanism on the rear lower arm (lateral link) at the same time as the 86/BRZ DAMPER ZZ-R, the position of the arm (link) is optimized, allowing the suspension to be used in a better state.
• By correcting the roll center shift caused by lowering the vehicle height, each suspension component moves smoothly in the correct position, improving rear-end grip and achieving miraculous road-following performance.
  This miraculous product increases rear-end grip and stability, which in turn increases the overall rigidity of the vehicle and leads to improved handling.
• The lower arm (lateral link) mounting section is equipped with a camber adjustment eccentric cam mechanism, allowing for ultra-wide range adjustment of the rear camber angle from -2° to -5°.
  Combined with the dedicated mounting bolts, this allows for fine, stepless adjustment of the rear camber over a wide range. This expands the range of alignment options and offers many benefits, such as reduced uneven tire wear, improved driving performance, and enhanced ride comfort.

*This product's dimensions have been optimized to match the lowering amount of DAMPER ZZ-R and DAMPER ZZ-R SpecDSC. Please do not install it simultaneously with any other products. Also, simultaneous installation with DAAMPER ZZ-R BB is not possible as it will reduce the ride height adjustment range and cause the minimum ground clearance to fall below safety standards.
*When using this product to adjust the camber, it will be necessary to adjust the toe to the appropriate value. If used beyond the range of the genuine toe adjustment, a separate toe adjustment arm may be required.
*The camber angle may vary slightly depending on the ride height and individual vehicle differences.