GP SPORTS Rear Lower Control Arm - Adjustable

To suit Toyota GT86 (ZN6) / GR86 (ZN8) & Subaru BRZ (ZC6/ZD8), and other models - See Below

The ultimate rear lower arm that maximizes footwork performance is now complete.

Even in stock condition, the Toyota 86 and Subaru BRZ have a difference in rear camber angle between the left and right sides, and since there is no adjustment, it is impossible to correct it to the correct value. Furthermore, lowering the vehicle tends to result in excessive rear camber, which in turn increases the difference between the left and right sides. Replacing the factory rear lower arms with these products not only corrects the camber angle changes caused by lowering the vehicle, but also allows for accurate adjustment to eliminate the difference between the left and right sides. In addition, the mounting position of the lower suspension bolts is offset by 35mm, allowing for a maximum lowering of approximately 30mm and a minimum lowering of approximately 10mm without changing the suspension geometry. This minimizes alignment changes for the same vehicle height, maximizing the suspension's inherent performance.

Specifications:

• Pillow Ball Bushings
• Turnbuckle Adjustment (Adjustable while installed)
• Modified vehicle inspection compliant (Japan)
• Achieves a maximum lowering of approximately 30mm
• Minimum lowering of approximately 10mm without changing the suspension geometry

*Color specifications may change without notice

The ball bearings  are made by the trusted, high-quality NMB (Minebea) manufacturer, and prevent alignment changes,

Two levels of adjustment are also available on the knuckle side,
further expanding the range of suspension settings.

The base treatment is carried out by a genuine parts surface treatment factory and boasts excellent rust and corrosion prevention.

Compatible Models:

• Toyota 86 (ZN6)
• Subaru BRZ (ZC6)
• Impreza [GRB/GRF/GVB/GVF/GH7/GH8/GJ7/GP7]
• Legacy B4 (BM9/BMM/BMG)
• Legacy Wagon (BR9/BRM/BRG)
• Legacy Outback (BR9/BRM/BRF)

*GR86 (ZN8) and BRZ (ZD8) fitment are not confirmed.

*For the 86 BRZ, vehicles that have undergone a minor change or do not have a model designation number or classification number listed are not eligible for the modified vehicle inspection documents, so they are considered competition parts.