GTIII RS Bolt-on Turbo Kit - GT86/BRZ FA20
GTIII RS Bolt-on Turbo Kit - GT86/BRZ FA20
Couldn't load pickup availability
In stock
HKS GTIII RS Bolt-on Turbocharger Kit
Exclusively designed for the FA20 platform found in the Toyota GT86 (ZN6) and Subaru BRZ (ZC6)
HKS has released a long-waited Bolt-on Turbo Kit with GTIII-RS turbine for 86/BRZ.
GTIII-RS turbine that is the best match with 2L engine, special designed turbo housing, and other special parts are made by HKS special turbo technology. This kit is available from a stock to tuned engine. The engine output will reach 450ps when this kit is installed to a tuned engine.
Included
- GTIII-RS Turbocharger Assy with an actuator.
- Oil & Water Piping Parts
- Air Cleaner, Suction Pipe
- Front-mounted Intercooler, Piping
- Exhaust Manifold,
- For 11001-KT001, CATless Extension
- For 11001-AT005, Extension with CAT
- Insulator Cover, Insulator Sheet
- Gaskets, Brackets, Bolts, etc.
- Target HP 320-450HP
MAX ENGINE OUTPUT
2.1L E/G + GTIII-RS : 334kw(454ps)/6400rpm
Stock E/G+ GTIII-RS : 251kw(342ps)/6600rpm
NA Stock : 136kw(185ps)/6800rpm
MAX TORQUE
2.1L E/G + GTIII-RS : 536N・m(55kgf・m)/4600rpm
Stock E/G+ GTIII-RS : 391N・m(40kgf・m)/4100rpm
NA Stock : 199N・m(20kgf・m)/4100rpm
Notes
*This kit can be used with HKS S-TYPE OIL COOLER KIT.
*OIL COOLER KIT is NOT included in this kit.
*Reinforced fuel parts such as injectors are required.
*Pressure sensor is required separately.
*Engine management parts are not included in this kit.
*Resetting is required.
*Vehicle modification is required in order to install this kit (Refer to the separated information.)
*Reinforced clutch is required to avoid slippage of the clutch disk that may occur due to significant torque characteristic change.
*it is strongly recommended to install an oil cooler to protect the engine.


