TOMEI POWERED EXPREME Outlet Component (Turbo Down Pipe)

To suit Mitsubishi 4B11 for Lancer Evolution X (10)

Larger, Optimized Flow for More Power

After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.

Feature / Spec

 COMPARISON VS STOCK:

Lost Wax casting process for maximum durability, precision without welds. Larger in size and diameter, smooth without any steps.

The larger curve design makes it possible for a much larger capacity. Improved efficiency through with a more linear layout.

Layout

Direct bolt on that retains the original stock layout.

WIDE MOUTH & 3 INCH PIPE.

Outlet is the smooth flowing design, without steps from the turbocharger. Manufactured with the lost wax process, combines both strength and beauty. After numerous tests, Front pipe is the 3 inches (76.3mm) greatly increases both power and torque.

Other Key Notes:

• O2 SENSOR BOSS FOR AFR GAUGES: The mounting boss is an M18, which makes it easy to fit the AFR sensor. Comes with a blind plug to seal the hole when not in use.

• FLEXIBLE PIPE DESIGN: Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.
  

• EASY TO WORK ON: The wide mouth was designed to be easy to install with the general common work tools.
• MIKALOR HIGH GRADE BANDS: The Supra Bands made by MIKALOR is what we have chosen to use, since they maintain the strongest torque to secure a proper strong connection. We also used Nejiname bolts.

Kit Contents:

• Outlet Component
• Gasket (Turbo side)
• Gasket (Catalyzer side)
• Clamp Band
• Blind Plug
• Copper Washer
• Stud Bolt
• Flange Nut
• Bolt Smooth Paste